Barking problems in your truck can be daunting especially if you are not sure of what is causing them. It could generate the aspect of fear of the unknown that causes anxiety. You then realise that this is not a good situation as brakes are a vital part of your vehicle and could cause life threatening situations. Repairing your brakes anytime they show a mild problem will help prevent bigger complications that could potentially cause dangerous accidents or at least inconvenience. In addition, being alert on the red alarms of bad brake malfunction and addressing simple brake repairs will prolong the life of your truck. Learn some common brake problems you will experience as you operate you vehicle.
Sticking Brakes This problem is not only common for tucks but all types of vehicles. Brakes start sticking when there is buildup of brake fluid or grease. Therefore, you need to check this buildup on a regular basis to make sure the brakes are well maintained. To restore the normal state of the brakes, remove the buildup using a degreaser and replace any parts of the brakes overwhelmed by the fluid including the brake linings. Persistent problems even after cleaning the grease away may be an indication of a malfunction in your drums or rotors. This needs a resurface in order to do away with sticking breaks completely.
Your Truck Pulling to One Side Another common problem with brakes is when your truck pulls to one side. Even though this issue may be barely perceptible at first, it will eventually pull your vehicle slightly to the right or left every time you apply brakes. This may literally not reflect an issue with the brakes; it could be possible problem with the steering wheel, wheel bearings, or the axle. However, you can try adjusting your brakes and ensure that they are equal on both sides. Strong adjustment on one side may cause the car to lean on one side on braking.
Sinking Brake Pedals The brake pedal might sink towards the floor especially for older trucks. You might even have to grind the pedal hard against the floor for the vehicle to stop. Changing the master cylinder in the truck is the way to address the problem. There are cases where even after changing the master cylinder, the pedals still remains sunk into the floor. In this case, seek for a more extensive truck brake repair as this could be an indication of leaking brake hydraulics.